Power Supplies For Ionizers (standard series)
Compact variable supply unit in rugged aluminium profile.
 3 outputs for connection to the Type SER/02 standard
ionizers via high voltage cable.
Maximum cable length per output: 3 meters (10').
Effect: adjustable.
Input voltage: 230VAC, 50-60Hz and 115VAC,
50-60Hz.
Output voltage: 27,5kV~2,8kHz, max. 2mA.
Power consumption: max. 30VA.
IP 54.
Dimensions: H=246 mm (9 5/8"), W=180 mm
(7 1/16"), D=100 mm (4"). |
 |
High efficiency and low-loss control unit. To be used with HE10-1 and
HE10-3 high voltage units.
4 outputs for connection to the Type SER/02 standard
ionizers via a standard 24V signal cable.
Maximum cable length per output: ≥ 10 meters (
33').
Effect: adjustable.
Input voltage: 230VAC, 50-60Hz and 115VAC,
50-60Hz.
Output voltage: Pulsating DC, U^=350V.
Pulse width: c. 10ms.
Frequency: Adjustable 170Hz to 440Hz.
Power consumption: max. 50VA.
IP 54.
Dimensions: H=280 mm (11"), W=180 mm
(7 1/16"), D=100 mm (4"). |
 |
HE10-1 Single-Output High Voltage Plug-In Unit.
High-voltage “slave” unit for the the
SER/02 ionizer.
Converts the pulse from the 10D power unit to high
voltage.
High effeciency and low-loss thanks to the use of DC
and low-voltage. |
 |
HE10-3 High Voltage Plug-In Unit with 3 Outputs.
High voltage “splitter” with 3 outputs for
the standard ionizer programme.
The high voltage cables between the HE10-3 and
ionizers should be as short as possible to reduce losses. |
 |
« Back to Antistatic, Charging & Web Cleaners
|
