 Ionizers for
the No Static 09
The following ionizers can be connected to the No Static 09 system. To achieve the maximum neutralization effect it
is important to choose the right ionizer for each application. Antistatic bars are manufactured in exact lengths
to match the application and neutralize across the complete width of the material.
To increase the ionization range further it is possible to connect compressed air to one type of the SER/02 series.
The ionizing air nozzles are used to ionize smaller areas and the compressed air connection makes it possible to
introduce ionization where it is needed with pin-point accuracy. Ionizing rings to be integrated in transportation
systems for granulate and powder, in the plastics, medical or food industry. The ionizing ring is mounted directly
with flanges in the tube system and the granulate or powder is neutralized when it passes through the ring. The
ionizing ring can also be mounted around the plastic tube in a filling machine.
No Static 09 is part of the standard Liros programme of ionizers for applications that only require a short range.
In those applications when the standard programme is not an optimum solution, Liros can offer tailor-made ionizer
solutions. |
| |
Ionizers for
the No Static 10D
The programme of ionizers for the No Static 10D system is the same as for the No Static 09. The difference is that
the high voltage unit is separated from the central unit, either as a plug-in unit (HE10-1) for the SER/02 antistatic
bar series or as a unit with 3 outputs (HE10-3) to connect the rest of the ionizers in the standard programme via a
short high voltage cable. |
| |
Ionizers for
the No Static Long Range programme
The ionizers for the LR programme are either the LR antistatic bar with a high voltage unit built-in, or separate
electrodes connected via a separate high voltage unit (RL-HVLE).
The LR charging system is configured the same way. Either with a charging bar with a built-in high voltage
generator, or separate charging electrodes connected via a separate charging generator. |
| |
Charging bar
and charging electrodes for the No Static Long Range programme
The LR charging system can be used as a separate charging system or as a complete combination with 2 outputs for
antistatic use and 2 outputs for charging use, connected to the same central unit.
In a charging application, used for adhering a product, for example securing a protective foil on stainless steel,
it is important that the foil has the same charging status on every charging occasion.
To obtain that, a neutralizing station should be mounted in a position to remove the potential charge from both
sides of the foil. When the foil then reaches the charging station, the same charging result is achived every
time. |
