Applications
 |
The LR system can be used as a pure antistatic system with
unique range and spread properties. The maximum range is over 1000 mm (40"), and at this distance the spread
is 600mm (24"). |
There are 3 different frequencies available to synchronise the system with the speed of the
production machines. The high voltage unit is mounted in the anti static bar, enabling it to utilise 100% of its
effect directly at the problem area without any loss of effect that a high voltage cable running alongside the
machine would suffer. The voltage in the cable connecting the central unit and the high voltage unit of the system
is only 24V.
Small separate electrodes which can be connected to a separate high voltage unit are available for targeted
ionization in a machine with limited space, or for mounting within a pipe system for transporting products such
as plastic granulate. These electrodes can also be used in applications including tube filling machines to prevent
the product from getting caught in the welding of the package and causing leakage.
|
The LR system can even be used as a complete static charge
system, with the central unit supplying either a charging bar with integrated charging generator or a charging
unit which can connect separate charging electrodes. |
A static charging system is used to hold something in position without the use of adhesive eg.
coating a piece of stainless steel with a protective plastic film. Other uses include positioning details in
advertising samples, static welding of plastic film instead of heat welding, pulsed adhesion of the final loops of
plastic bags in a machine for rolling plastic bags, etc.
|
The LR system has one unique function. The same central unit
can be used to connect 2 outputs for anti static applications and 2 outputs for charging applications. The
ability to run both static removal and static charging operations from one system is unique and extremely
versatile. |
The process of coating sheets of stainless steel with a protective plastic foil to avoid
scratches when piling or rolling the sheets requires 2 outputs from the central unit to discharge the plastic foil
with an antistatic bar on each side. This station ensures that the plastic foil always has the same charge (neutral)
when it approaches the charging station. This ensures a repeated, optimal charge against the steel sheet at every
cycle.
Discharging static from a product which at a later stage is to be statically fixed in a certain position ensures
properly functioning automated production. An innate charge within the product does not disturb the charging process,
which can then be repeated with the same charge every time.
« Back to Antistatic, Charging & Web Cleaners
|
